Mfr. Part: RP3300A
Manufacturer: RIGOL Tech
Category: Test Equipment Accessories
View More RIGOL Technologies Probes >>
Mfr. Part: SA-DS1000Z
Serial Bus Analysis Option: RS232/UART, I2C, SPI Trigger and Decoding function
Mfr. Part: ADP0150BNC
View More RIGOL Technologies Jacks/Adapters/Plugs/Clips >>
Mfr. Part: REC-DS1000Z
Real Time Waveform Record and Replay Option
Mfr. Part: DSA1000-SCBA
Soft Carrying Bag for a DSA1000 Series or DSA1000A Series Spectrum Analyzer
Mfr. Part: RP3500A
Mfr. Part: CARRY BAG-G1
Carry Case for a DSA800 Spectrum Analyzer, DG4000 generator, or DS2000 scope.
Mfr. Part: DSA1000-RMSA
Rack Mount Kit for a DSA1000/DSA1000A Spectrum Analyzer or DS6000 Scope
Mfr. Part: ULTRASTATION ADVANCED
UltraStation wave generation software for DG4000 and DG5000 Series generators.
Mfr. Part: RP1002C
Mfr. Part: USB-GPIB
Mfr. Part: DSA800-AMK
Advanced Measurement Kit(DSA815Only)
Mfr. Part: DSA800-RMSA
Rack Mounting Kit for a DSA800 Series Spectrum Analyzer
Mfr. Part: DG4-RMK
Rack Mounting Kit for a DG4000 Series Generator.
Mfr. Part: AT-DS1000Z
Adv Trg Option: RS232/UART, I2C, SPI, Runt, Windows, Nth Edge, Delay, Time Out
Mfr. Part: MEM-DS1000Z
Option Extends deep memory to: 24Mpts (1 CH)/12Mpts (2 CH)/6Mpts (4 CH)Memory
Mfr. Part: RP1050D
Mfr. Part: ATT0330AH
30dB High Power Attenuator, Max Power 100W
Mfr. Part: CB-NM-NM-75-L-12G
N(M)-N(M) RF Cable
Mfr. Part: RM-DS1000Z
Rack Mount Kit for DS1000Z Oscilloscope
Mfr. Part: CB-NM-SMAM-75-L-12G
N(M)-SMA(M) RF Cable
Mfr. Part: RP1000P
Mfr. Part: PA-DSA1030
Preamplifier option for the DSA1030 or DSA1030-TG
Mfr. Part: DP8-AFK
Detect and Analyzer option for DP832
Mfr. Part: SD-DS2
Serial data decode option for DS2000 Scopes. Includes RS-232, I2C & SPI decoding
Mfr. Part: DSA1000-AMK
Spectrum Analyzer Measurement Package Option
Mfr. Part: BW2T3-MSO/DS4000
Oscilloscope Accessory; Bandwidth Upgrade; from 200MHz to 350MHz; For MSO/DS402X
Mfr. Part: RP1001C
Mfr. Part: M3TB24
24 channel MUX Terminal Box
Mfr. Part: PA-DSA832
Preamplifier option, 100kHz to 3.2GHz (only for DSA832 or DSA832-TG)
Mfr. Part: RM-DP-1
Rack Mount Kit for DP1000 series Power Supplies
Mfr. Part: VB1040
800 MHz to 4 GHz VSWR Bridge for DSA1030-TG and DSA1030A-TG
Mfr. Part: DP8-DIGITAL-IO
Four channels for trigger in & out option forDP832
Mfr. Part: RM-2-M300
Rack Mounting Kit for two M300
Mfr. Part: BNCCABLE
BNC Cable (length 1 meter)
Mfr. Part: SD-FLEXRAY-DS4
FLEXRAY BUS Serial Decode Option for the DS4000 Oscilloscope.
Mfr. Part: DSA1000-FPCS
Replacement Front Panel Cover for a DSA1000/DSA1000A Series Spectrum Analyzer
Mfr. Part: DS1000LM
Replacement Logic Module for DS1000D Series Digital Oscilloscopes (Part# LH1116)
Mfr. Part: RP1004C
Mfr. Part: BW2T5-MSO/DS4000
Oscilloscope Accessory; Bandwidth Upgrade; from 200MHz to 500MHz; For MSO/DS402X
Mfr. Part: SD-CAN-DS4
CAN BUS Serial Decode Option for the DS4000 Oscilloscope.
Mfr. Part: SD-RS232-DS6
RS232 & UART BUS Serial Decode Option for the DS6000 Oscilloscope.
Mfr. Part: MSO UPGRADE PACKAGE
Standard logic probe for MSO1000Z. Upgrades a DS1000Z or DS1000Z-s to an equiva
Mfr. Part: M3TB48
MATRIX Terminal Box
Mfr. Part: RP7150
Mfr. Part: M3TB16
ACT Terminal Box
Mfr. Part: RP5600A
Mfr. Part: PA-DSA875
Preamplifier option, 100kHz to 7.5GHz (only for DSA875 or DSA8375-TG)
Mfr. Part: DS6000-RMSA
Rack Mounting Kit for a DSA1000 Series or DSA1000A Series Spectrum Analyzer
Mfr. Part: PA1011
10W power amplifier for waveform generators
Mfr. Part: RP1100D
Mfr. Part: DP8-HI-RES
1mV/1mA Resolution Option for DP832
Mfr. Part: RF ATTENUATOR KIT
Kit Includes 6dB Attenuator (1pcs), 10dB Attenuator (2pcs)
Mfr. Part: RX1000
RF Demo Kit (Receiver)
Mfr. Part: DM-RMK
Rack Mounting Kit for a DM3000 Series DMM.
Mfr. Part: SD-I2C/SPI-DS4
I2C & SPI BUS Serial Decode Option for the DS4000 Oscilloscope.
Mfr. Part: CAN-DS2000A
CAN triggering & Decoding option for the DS2000A Series Oscilliscopes
Mfr. Part: RP7080S
Mfr. Part: DG5-FH
Frequency Hopping option for DG5000 series Function Generators
Mfr. Part: DS1000LM:DS1000LM-CABLE
Replacement Data Ribbon Cable for DS1000D Series Digital Scopes (Part# FC1868)
Mfr. Part: RP1005C
Mfr. Part: IQ-DSG3000
I/Q Modulation option for DSG3000 Signal Generators
Mfr. Part: SD-FLEXRAY-DS6
FLEXRAY BUS Serial Decode Option for the DS6000 Oscilloscope.
Mfr. Part: RM-DS-1
Rack Mount Kit for DS1000CA/DS1000E/DS1000D Series
Mfr. Part: BW3T5-MSO/DS4000
Oscilloscope Accessory; Bandwidth Upgrade; from 350MHz to 500MHz; For MSO/DS403X
Mfr. Part: RP2200
Mfr. Part: SD-CAN-DS6
CAN BUS Serial Decode Option for the DS6000 Oscilloscope.
Mfr. Part: DSA UTILITY KIT
DSA Accessories Package
Mfr. Part: M3TB64
64 channel MUX Terminal Box
Mfr. Part: VB1032
VSWR Bridge with VSWR-DSA800, VSWR-DSA1000 licenses included. 1 MHz - 3.2 GHz
Mfr. Part: RM-2-DP800
Rack Mount Kit for DP800 series Power Supplies
Mfr. Part: RM-2-DG1000Z
Rack Mounting Kit for two DG1000Z
Mfr. Part: VB1020
800 MHz -2 GHz VSWR Bridge including DSA800-VSWR software for the DSA815-TG
Mfr. Part: ULTRASPECTRUM
Software for DSA1000/DSA1000A spectrum analyzers.
Mfr. Part: RM-1-M300
Rack Mounting Kit for one M300
Mfr. Part: ATTENUATOR-40
40 dB attenuator accessory for oscilloscopes or generators
Mfr. Part: M3TB20
20 channel MUX Terminal Box
Mfr. Part: DM-DG1/2-RMK
Rack Mounting Kit for a DG1000 Series Generator or DMM.
Mfr. Part: RP1003C
Mfr. Part: MEM-DS2
Memory upgrade from 14 million memory points to 56 million memory points
Mfr. Part: SD-RS232-DS4
RS232 BUS Serial Decode Option for the DS4000 Oscilloscope.
Mfr. Part: M3TB34
MFC Terminal Box
Mfr. Part: RP6150A
Mfr. Part: DS6000-FPCS
Replacement Front Panel Cover for a DS6000 Oscilloscopes
Mfr. Part: DG-POD-CABLE
Spare shielded RF signal cable for DG-POD-A Digital Signal Generator Module
Mfr. Part: RP1018H
Mfr. Part: RF ADAPTOR KIT
Mfr. Part: AT-DS2
Advanced triggering options for DS2000 Scopes. Incl. USB triggering & others
Mfr. Part: RP7080
Mfr. Part: DS6000-DK
Demo Board for oscilloscopes
Mfr. Part: DG4/DS1Z-RMK
Rack Mounting Kit for a DG4000or DS1000Z
Mfr. Part: T2R1000
Mfr. Part: RP1300H
Mfr. Part: M3TB32
32 channel MUX Terminal Box
Mfr. Part: DP8-INTERFACE
RS-232 and LAN interface option for DP832
Mfr. Part: RM-1-DG1000Z
Rack Mounting Kit for one DG1000Z
Mfr. Part: TX1000
RF Demo board with built in 1 GHz Oscillator, mixer, filters, and amplifier.
Mfr. Part: ULTRA ACQUIRE PRO
Scan Control Software for M300 Series Mainframes and cards
Mfr. Part: RF CATV KIT
Mfr. Part: ARM
Arm mount option for a DSA1000/DSA1000ASpectrum Analyzer or DS6000 Scope
